|
|
|
Note: RACK16 is a PC box supplied by MCDI Inc. supporting up to 8 TLR+ ISA bus alarm receiver card. As of January 1st 2003, MCDI stopped making the PC box for RACK16. However the program called RACK24 powering RACK16 is available as shareware.
RACK24 software is free but not supported without a service contract. The RACK24 software enables the conversion of a normal PC box with up to 8 TLR+ cards (rev. 4 and up) into a complete alarm receiver.
Next generation of Multi-line alarm receivers, based on Exprecium card, will be announced next April 2006.
Description
RACK16 is a (19") rack mounted receiver with a 2 line basic configuration upgradable to 16 lines. Displays line status and incoming signals on integrated monitor.
Based on high-performance TLR+ receiver, RACK16 comes with 2 keyboard connectors, 2 serial ports, Ethernet port on option and parallel printer port.
RACK16 is Internet compatible and connects directly to LAN without in between PC. Monitoring Station sees RACK16 as a receiver, COM or LAN connected. RACK16 is the reliable and configurable alternative for the high volume year 2000 Central.
Line circuitry is certified: FCC(USA), IC(Canada), CE-Security(Europe), CE-Telecom (Europe), ICT (Germany), ICPT (Belgium)
|
|
|
|
|
Specifications
|
|
|
|
Communications
Type : Pulse, DTMF, FSK
Reception Speed : 10, 20, 40 pps (dr/cs)
Handshake and Kiss-off : 1400Hz / 2300Hz//2225Hz
Pulse Frequency//Telim : 1800Hz / 1900Hz//1100Hz
Reception Formats supported:
Acron Radionics 6500
Ademco: Radionics extended
- Slow/Fast; Sescoa Slow
- Contact ID; Sescoa Standard
- Extended; SIA
- Express; Contact ID
- High Speed - compressed & converted
CFSK, VFSK Silent Knight Slow
MCDI-Take-a-look SurGard
FBI Super Fast
3x1 3x1 extended
4x1 3x1 extended compressed 4x2
4x1 extended 4x1 extended compressed 4x2
4x2 Zero removed 3x1, 4x1 extended.
Opteks Varitech C&K: Bell 103A2 or CCIT on option
For Germany and Scandinavia, as Pulse replacement:
Telim Robofon
Power Requirements:
Input voltage selectable: 115V/230 V
From external 12V Battery input: 5 A
Fully integrated UPS function
Event Logging:
Stores up to 20 000 events in a non volatile memory. Each TLR+ receiver board also has its own logging capacity of 800 to 1 000 events.
|
|
|
Printer Output:
Standard DB25 connector for Centronics Parallel Interface
Addresses:
Individual line numbering. RACK16 is addressable as two 8 line receiver blocks.
Battery Back-up:
RACK16 provides charging and supervision circuitry for an external 24-Volt battery (not supplied).
Charging Voltage 27.6 v
Charging Current Limit .6 a
Size and construction:
19" / 48 cm (W) x 20" / 51 cm(D) x 7" / 18 cm (H). Rugged steel chassis, zinc plated and sturdy protective coating. Cooling fan at front panel with removable filter (in flow)
Monitoring Software:
RACK16 interfaces with Monitoring software in Native mode, Ademco 685 emulation mode and SurGard emulation mode.
Compatible with most automation software on the market.
Configuration
- Processor 486 DX4 100 Mhz w/watch dog.
- Disk on chip 2mb.
- Monitor 7" VGA 80X25.
- Floppy drive 3.5".
- Drive channels for DCX and ITC/IP.
- Parallel port LPT1.
- Network access (Ethernet on option).
|
|
|
|
winsamm.com - products - download section - contacts- distributors-
warranty- price quotation - feature request
dutch - deutsch - english - español - français - português - chinese
|
|
|